Digital Input Module

•  8 digital input channels
•  For fixed or momentary switches
•  For plus (+), minus (-) or potential free signals
•  High brightness running and alarm indication on one standard single colour LED
•  Overcurrent protection for running and alarm indication LED
•  Reduced amount of cabling since running and alarm indications are connected in parallel with switch
•  Main switch and interlock functions can be used to block any function
•  Attach infrared detectors or magnetic switches directly for advanced burglar alarm
•  Simple fuse reset function
•  Dimmer function for running indications
•  Time-on, time-off and touch protection delays available for all inputs
•  Detachable terminals, 2.5mm², spring connection
•  Wide range power supply, 9-32VDC

Features

Each module has 8 input channels. Each channel can be individually configured as fixed or momentary switch.

A separate light emitting diode (LED) can be connected in parallel with each switch for running/alarm indication. This feature reduces the amount of cables
and eases the installation.

The running indication can be controlled by any input or output in the system.
One input channel can control any number of outputs in the system.

Several types of time delays are available and one input can control several outputs with different delays.

Infrared detector signals and magnetic switches can be connected directly to the input channels to create a burglar alarm.

This EmpirBus™ slave module can only be used with the EmpirBus™ master unit.